Jablotron JA-80W wireless PIR / MW motion detector View full size

Jablotron JA-80W wireless PIR / MW motion detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

More details


16 other products in the same category:


The detector guards the same way as a classic PIR motion detector.

When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.


Power supply Lithium battery type LS(T)14500 (3.6V/2 Ah AA), power supply type C
Typical battery lifetime Approx. 2 years (PIR sensor sleep time 5min.)
Communication band 868 MHz, Oasis protocol
Communication range Approx. 300m (open area)
Recommended installation height 2.5 m above floor level
PIR sensor detection angle/detection range 120° / 12 m (with basic lens)
MW detection range/ MW frequency 0.5 to 20m / 9.35 GHz
Operational environment according to EN 50131-1 II. indoor area
Operational temperature range -10 to +40 °C
Dimensions 110 x 60 x 55 mm
EN 50131-1, EN 50131-2-4, EN 50131-6 EN 50131-5-3 classification Grade 2
Complies with ETSI EN 300220, ETSI EN 300 440-1, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to VO-R/10/06.2009-9


No products

Shipping 0,00€
Tax 0,00€
Total 0,00€

Prices are tax included

Cart Check out

New products

» No new products at this time